The machine can’t start an extraction in any way, infinitely rotating a drum on low turns? Or perhaps it stopped, but the door doesn’t want to open, and in a drum there is water? All this signs of possible breakage. Here it is only not always clear what broke in your washing machine. Exists the whole 6 possible reasons.
Reason the first: wrong program
Strangely enough, errors of owners most often lead to the fact that the washing machine diligent before ceases to wring out linen. For example, the delicate mode of washing is selected. Some models don’t wring out linen when using certain programs even if you in addition expose quantity of turns. Check whether the correct mode of washing is selected.
Reason the second: non-uniform loading
If you loaded in a drum one heavy thing or several very easy, the machine can not cope with their correct distribution. The imbalance results, the sensitive sensor fixes the strong vibration and the automatic machine reduces turns to save a drum from jolting. The same occurs if all linen glorks a lump (it is hammered into a blanket cover or it is overwound). Try to put several small to one big thing to equilibrate loading, or spread out things in a drum more carefully.
Reason the third: water doesn’t merge
If in a drum there was water, then the machine can’t start an extraction. The special sensor controlling water level transfers an error and the drum stops. Failure of the drain pump or a contamination of the filter can become the reason of it. Sometimes water merges, but the drum all the same doesn’t wish to work in the extraction mode. In this case it is worth checking the sensor of water level.
Reason the fourth: the tachometer broke
The tachometer is responsible for monitoring of turns of a drum. If it fails, the machine can’t just begin to wring out linen. Such breakage occurs at all vendors. Most often she is because of the long period of operation of the machine (just it is time). Sometimes it happens because of the become loose fixing.
Reason the fifth: the control module is faulty
The module of control can break as a result of unexpected voltage surge, a production defect, hit of moisture, errors in operation or for other reasons. As a result the washing machine ceases to wring out linen. Sometimes repair of the module helps, its changeover sometimes is required. Certainly, it is cheaper simple to repair the control module, however sometimes it needs to be changed after all.
Reason the sixth: the engine failed
Unpleasant situation. Perhaps, there was an engine winding breakaway or maybe one of its details failed. Bad quality of an extraction can become the total of it. It happens because of natural wear, voltage surges, misuse etc. If you see that the engine of the washing machine works incorrectly, call customer service “EG Appliance Repair LA“.
If you correctly selected the program and loaded linen according to requirements of the instruction, but the washing machine all the same doesn’t wring out linen, call the repairman. The expert will quickly define the reason of low turns in a drum and will remove it directly at home.
Los Angeles washer and dryer repair